Avaya IX Collaboration Unit CU360 - Configuring Avaya IX CU360 Port Ranges; Configuring NAT and Firewall

Configuring the Avaya IX
™
CU360 port ranges
About this task
You can configure the base port to any value between 1024 and 65535.
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configured a PIN to gain access to the advanced settings on the
endpoint, Avaya IX
™
CU360 prompts you to enter the PIN. After you enter the PIN, Avaya
IX
™
CU360 displays the Advanced window.
3. Click Networks > Preferences > Dynamic Ports.
4. Configure the following fields:
TCP UDP BFCP UDP
Automatic Automatic Automatic
Ports Ports Ports
If you select No in the Automatic field, you should manually configure the TCP, UDP, or
BFCP UDP base ports in Ports.
5. On the web interface, click Save.
Related links
Enabling the Avaya IX CU360 advanced settings on page 37
Configuring NAT and firewall in Avaya IX
™
CU360
About this task
Configure a NAT router and firewall for Avaya IX
™
CU360.
This configuration is available only if your administrator enables the advanced settings for users.
Before you begin
Configure the Avaya IX
™
CU360 port ranges.
Advance administration
April 2020 Installing and Administering Avaya IX Collaboration Unit CU360 92
Comments on this document? infodev@avaya.com