Name Description
NAT Discovery The options to discover the public IP address of Avaya IX
™
CU360.
The options are:
• Manual: Enter the public IP address manually in Public IP Address.
• HTTP autodiscovery: Uses a public HTTP server to get the Avaya IX
™
CU360 public IP address.
• STUN autodiscovery: Uses a public STUN server to get the Avaya IX
™
CU360 public IP address. If you select this option, enter the server
name and port number of the STUN server in the Server and Port
fields respectively.
Pinhole Refresh Time (sec.) The number of seconds to open a pinhole through the firewall.
Pinhole Keepalive The connection is kept open by sending periodic pings to the remote
control unit.
Defining the priority of media in Avaya IX
™
CU360
About this task
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configured a PIN to gain access to the advanced settings on the
endpoint, Avaya IX
™
CU360 prompts you to enter the PIN. After you enter the PIN, Avaya
IX
™
CU360 displays the Advanced window.
3. Click Networks > Preferences > QoS.
4. Configure the following fields:
• Use QoS
• Quality of Service
• Precedence/TOS
• DiffServ.
5. On the web interface, click Save.
Advance administration
April 2020 Installing and Administering Avaya IX Collaboration Unit CU360 94
Comments on this document? infodev@avaya.com
To Next Page
Loading...
