Monitors General field descriptions
Name Description
Number of Monitors The option to display available monitors that are connected to Avaya IX
™
CU360.
Activate the HDMI port on Avaya IX
™
CU360 which connects to a monitor
through the HD1 port.
The options are:
• <auto>: Avaya IX
™
CU360 automatically detects the connected
monitor.
• HD1: Avaya IX
™
CU360accepts input only from the monitor connected
through the HD1 port.
Resolution HD1 The option to define the resolution of the connected monitor through the
HD1 port.
CEC – Select as Source on
Incoming Calls for endpoint
only
The option to use a video source for the monitor which is different from
the Avaya IX
™
CU360 connected monitor.
For an incoming call, if you select the option to Yes, the monitor is
automatically switched to Avaya IX
™
CU360 video source.
Configuring the Avaya IX
™
CU360 video layouts
About this task
After you connect the monitor to the HDMI port on Avaya IX
™
CU360, you can configure the video
layouts.
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configured a PIN to gain access to the advanced settings on the
endpoint, Avaya IX
™
CU360 prompts you to enter the PIN. After you enter the PIN, Avaya
IX
™
CU360 displays the Advanced window.
3. Click I/O Connections > Monitors > PIP-PaP-PoP.
Advance administration
April 2020 Installing and Administering Avaya IX Collaboration Unit CU360 82
Comments on this document? infodev@avaya.com
To Next Page
Loading...
