Avaya IX Collaboration Unit CU360 - Configuring Advanced WiFi Network Connectivity

Configuring advanced WiFi network connectivity in Avaya
IX
™
CU360
Before you begin
Enable the Avaya IX
™
CU360 advanced settings and Avaya IX
™
CU360 network priority.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configured a PIN to gain access to the advanced settings on the
endpoint, Avaya IX
™
CU360 prompts you to enter the PIN. After you enter the PIN, Avaya
IX
™
CU360 displays the Advanced window.
3. Click Networks > Wi-Fi > Parameters.
4. Configure MTU.
5. On the web interface, click Save.
Related links
Enabling the Avaya IX CU360 advanced settings on page 37
Configuring network priority settings in Avaya IX CU360 on page 86
Wi-Fi Parameters field descriptions
Name
Description
MTU The maximum size of data packets sent around the network.
The default MTU size is 1360.
If you transmit data packet of a larger MTU size, the network drops or
fragments the packet. To avoid packet loss or fragmentation, all network
components must use the same MTU size.
For IPv4 address, set the MTU size in the range of 576 through 1500.
For IPv6 address, set the MTU size in the range of 1280 through 1500.
Configuring advanced WiFi network connectivity in Avaya IX
™
CU360
April 2020 Installing and Administering Avaya IX Collaboration Unit CU360 91
Comments on this document? infodev@avaya.com