Avaya IX Collaboration Unit CU360 - Chapter 3: Initial Setup and Connectivity; Checklist for Setting Up Avaya IX CU360

Chapter 3: Initial setup and connectivity
Checklist for setting up Avaya IX
™
CU360
No. Task Description Notes
1 Set up the Avaya IX
™
CU360 hardware.
Connecting Avaya IX CU360 on
page 25
—
2 Switch on Avaya IX
™
CU360.
Switching Avaya IX CU360 on or
off on page 26
—
3 Pair the Avaya IX
™
CU360 remote control
unit.
Pairing the remote control unit
with Avaya IX CU360 on
page 27
—
4 Configure basic settings Configure the basic settings:
• Automatically: Configuring
Avaya IX CU360
automatically on page 28
• Automatically for Avaya
Equinox
®
Conferencing:
Configuring Avaya IX CU360
automatically for Avaya
Equinox
®
Conferencing on
page 29
• Manually:
Configuring Avaya
IX CU360 manually on
page 30
You can use one of the
following interfaces to
configure settings:
• The Avaya IX
™
CU360
remote control unit.
• The Avaya IX
™
CU360
web interface
• Avaya Scopia
®
Control using iOS
devices
• Avaya Collaboration
Control using Android
devices
Connecting Avaya IX
™
CU360
About this task
Avaya IX
™
CU360 contains the following standard equipment:
• Endpoint
• Remote control unit with batteries
April 2020 Installing and Administering Avaya IX Collaboration Unit CU360 25
Comments on this document? infodev@avaya.com