Cameras General field descriptions
Name Description
Default Camera Avaya IX
™
CU360 connects the default camera through HD 1 or USB
port.
To configure the Default Camera, the options are:
• HD 1: The built-in camera.
• USB: Select if you connect the Avaya video grabber to the USB port.
Camera Control by Far Site The option to control the Avaya IX
™
CU360 camera from remote
endpoint.
Bring Back to Place Avaya IX
™
CU360 stores the camera positions when the camera is turned
off and restores this position when the camera is turned on.
Configuring the Avaya IX
™
CU360 HD1 port
About this task
Configure the settings of each camera that you connect to the HD1 port of Avaya IX
™
CU360.
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configured a PIN to gain access to the advanced settings on the
endpoint, Avaya IX
™
CU360 prompts you to enter the PIN. After you enter the PIN, Avaya
IX
™
CU360 displays the Advanced window.
3. Click I/O Connections > Cameras > HD1.
4. Select Yes for Enable the camera.
You cannot disable Default Camera.
5. Configure the following fields:
• Control Camera
• Tracking
• White Balance Mode
Cameras General field descriptions
April 2020 Installing and Administering Avaya IX Collaboration Unit CU360 79
Comments on this document? infodev@avaya.com
To Next Page
Loading...
