Avaya IX Collaboration Unit CU360 - Configuration of Avaya IX CU360 Basic Settings

• Language: Select a language from the drop-down list. This field is optional.
3. Click Login.
Configuration of Avaya IX
™
CU360 basic settings
Avaya IX
™
CU360 supports the following three methods to configure the basic settings:
• Easy to Start
• Auto Provisioning
• Manual Setup
Easy to Start
An automatic configuration option to set up Avaya IX
™
CU360 as a SIP endpoint if you have
Avaya Equinox
®
Conferencing deployed in your enterprise network. The auto configuration
feature, which uses DNS discovery, must be enabled for your Avaya Equinox
®
Conferencing
deployment. Avaya IX
™
CU360 automatically receives the SIP configuration and other settings
from the Avaya Equinox
®
Conferencing deployment. You will need to enter your personal
credentials or the phone number and extension of your video endpoint for the configuration.
Auto Provisioning
An automatic configuration option using a service code that you must provision for Avaya IX
™
CU360. When you switch on Avaya IX
™
CU360 for the first time, it prompts you to enter the
service code, after which the basic settings are automatically configured. Using this option, Avaya
IX
™
CU360 can be provisioned as an H.323 or SIP endpoint, automatically connects to the
enterprise directory, and can be set up to upgrade automatically.
Manual Setup
A manual configuration option using the quick setup wizard to configure Avaya IX
™
CU360 and the
network settings yourself. You can also use this option to modify the existing configuration.
Configuring Avaya IX
™
CU360 automatically
About this task
Avaya IX
™
CU360 prompts you to enter the service code that initiates the automatic configuration
when you start the endpoint for the first time. The administrator must provision Avaya IX
™
CU360
for automatic configuration and to send the service code to users.
Procedure
1. Start Avaya IX
™
CU360.
Avaya IX
™
CU360 displays the quick setup wizard.
2. From the drop-down list, select your preferred language.
3. (Optional) To configure Wi-Fi, click Wi-Fi, and configure your wireless network settings.
Initial setup and connectivity
April 2020 Installing and Administering Avaya IX Collaboration Unit CU360 28
Comments on this document? infodev@avaya.com