Avaya IX Collaboration Unit CU360 - PIP-PaP-PoP Field Descriptions

4. Configure the following fields:
• MultiImage Mode
• MultiImage Type
• PIP – Position
• PIP – Rotation
• PIP – Size
5. On the web interface, click Save.
Related links
Enabling the Avaya IX CU360 advanced settings on page 37
PIP-PaP-PoP field descriptions
Name Description
MultiImage Mode The option to enable or disable PIP, PaP, or PoP video layouts,
depending on the number of video streams available on the monitor.
The options are:
• <auto>: Enables PiP, PaP, or PoP automatically when the number of
video streams is greater than the number of available monitors.
The order of the video streams is set automatically with precedence to
the presentation video streams.
• Off: Always disables PIP, PaP, or PoP.
• On: Always enables PiP, PaP or PoP with two video streams.
MultiImage Type The option to configure the video layouts available to users.
The options are:
• <auto>: Automatically enables PIP, PaP and PoP layouts.
• PIP: Enables only PiP.
• PaP: Enables only PaP.
• PoP: Enables only PoP.
If you use a 4K UHD or 2160p (3840x2160) monitor, by default
MultiImage Type is set to PaP .
PIP – Position The option to configure the position of the small overlapped image on the
monitor.
PIP – Rotation The option to enable or disable image rotation and controls the direction
of the image rotation.
PIP – Size The option to select the size of the small overlapped image on the
monitor.
PIP-PaP-PoP field descriptions
April 2020 Installing and Administering Avaya IX Collaboration Unit CU360 83
Comments on this document? infodev@avaya.com