Related links
Enabling the Avaya IX CU360 advanced settings on page 37
Configuring the Avaya IX
™
CU360 camera
About this task
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configured a PIN to gain access to the advanced settings on the
endpoint, Avaya IX
™
CU360 prompts you to enter the PIN. After you enter the PIN, Avaya
IX
™
CU360 displays the Advanced window.
3. Click I/O Connections > Cameras > General.
4. Configure the following fields:
• Default Camera
• Camera Control by Far Site
• Bring Back to Place
5. On the web interface, click Save.
Related links
Enabling the Avaya IX CU360 advanced settings on page 37
Avaya IX CU360 camera and LED indicators on page 15
Advance administration
April 2020 Installing and Administering Avaya IX Collaboration Unit CU360 78
Comments on this document? infodev@avaya.com
To Next Page
Loading...
