4. Click Next.
5. Click Auto Provisioning.
Avaya IX
™
CU360 displays the window to enter the service code.
6. Enter the service code.
You can enter the service code in the following two formats:
• A full 12–digit service code: The first 5 digits identify the Avaya Equinox
®
Management
server, and the subsequent 7 digits identify the Avaya IX
™
CU360 endpoint.
• A partial 5–digit service code: The 5 digits identify the Avaya Equinox
®
Management
server, while the subsequent 7 digits can be either empty or contain zeros.
Avaya IX
™
CU360 displays the name of the Avaya IX
™
CU360 endpoint configuration that
matches the service code.
7. Click Next.
Result
• If you entered the full 12–digit service code, the Avaya IX
™
CU360 configuration is complete.
• If you entered a partial 5–digit service code, Avaya Equinox
®
Management displays a red
clock icon against the Avaya IX
™
CU360 name. The administrator must complete the Avaya
IX
™
CU360 configuration, which is pushed to the endpoint.
Configuring Avaya IX
™
CU360 automatically for Avaya Equinox
®
Conferencing
About this task
Configure Avaya IX
™
CU360 automatically as a video conferencing endpoint in Avaya Equinox
®
Conferencing. Use a wired network connection for best results.
The quick setup wizard automatically configures the SIP settings for Avaya IX
™
CU360. The setup
wizard gets the SIP settings from the network server discovered during the automatic
configuration process.
Procedure
1. Start Avaya IX
™
CU360.
Avaya IX
™
CU360 displays the quick setup wizard.
2. From the drop-down list, select your preferred language.
3. (Optional) To configure Wi-Fi, click Wi-Fi, and configure your wireless network settings.
4. Click Next.
5. Click Easy to Start.
Avaya IX
™
CU360 prompts you to enter your email address.
Configuration of Avaya IX
™
CU360 basic settings
April 2020 Installing and Administering Avaya IX Collaboration Unit CU360 29
Comments on this document? infodev@avaya.com
To Next Page
Loading...
