6. Type your email address, and click Next.
Avaya IX
™
CU360 prompts you to choose your environment.
7. Select your environment from the drop-down list, and click Next.
Avaya IX
™
CU360 prompts you to enter your login credentials.
8. Enter your login credentials, and click Next.
Based on your network configuration, you might have to enter your:
• Network login credentials.
• SIP phone extension number and password.
Avaya IX
™
CU360 prompts you that the configuration is complete.
9. Click Done.
Configuring Avaya IX
™
CU360 manually
About this task
Manually configure the Avaya IX
™
CU360 basic settings, such as the system name, language, and
network settings, using the quick setup wizard. Some settings might be customized for your
enterprise.
Avaya IX
™
CU360 automatically displays the quick setup wizard when you switch on Avaya IX
™
CU360 or log in to the web interface for the first time.
Procedure
1. Start Avaya IX
™
CU360.
Avaya IX
™
CU360 displays the quick setup wizard.
2. From the drop-down list, select your preferred language.
3. (Optional) To configure Wi-Fi, click Wi-Fi, and configure your wireless network settings.
4. Click Next.
5. Select Manual Setup.
Avaya IX
™
CU360 displays the Welcome to Avaya cu360 window.
6. Configure the following fields:
• System Name
• Country
• Language
• Protocol Type
7. Click Next.
Avaya IX
™
CU360 displays the Configure TCP/IP (GLAN) window.
Initial setup and connectivity
April 2020 Installing and Administering Avaya IX Collaboration Unit CU360 30
Comments on this document? infodev@avaya.com
To Next Page
Loading...
