Avaya IX Collaboration Unit CU360 - NAT Field Descriptions

Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configured a PIN to gain access to the advanced settings on the
endpoint, Avaya IX
™
CU360 prompts you to enter the PIN. After you enter the PIN, Avaya
IX
™
CU360 displays the Advanced window.
3. Click Networks > Preferences > NAT.
4. Configure the following fields:
• NAT Traversal
• NAT Discovery
• Public IP Address:
This option is available when you select Manual.
• Server:
This option is available when you select STUN autodiscovery.
• Port:
This option is available when you select STUN autodiscovery.
• Pinhole Refresh Time (sec.)
• Pinhole Keepalive
5. On the web interface, click Save.
Related links
Enabling the Avaya IX CU360 advanced settings on page 37
Configuring the Avaya IX CU360 port ranges on page 92
NAT field descriptions
Name
Description
NAT Traversal The option to enable a NAT router and firewall for Avaya IX
™
CU360.
Configure the Avaya IX
™
CU360 port ranges.
Select No if Avaya IX
™
CU360 has a public IP address.
Table continues…
NAT field descriptions
April 2020 Installing and Administering Avaya IX Collaboration Unit CU360 93
Comments on this document? infodev@avaya.com