Configuring an H.323 gatekeeper for Avaya IX
™
CU360
About this task
Manually configure an H.323 gatekeeper or modify the H.323 gatekeeper connection configured
during the initial setup.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. Do one of the following:
• On the endpoint, click Networks.
• On the web interface, click Protocols.
3. Click H.323.
4. Configure the following fields:
Endpoint menu Web interface
E.164 H.323 Name
Use Gatekeeper E.164
Mode Refuse Calls by IP Address
Gatekeeper Address Use Gatekeeper
— Gatekeeper Address Mode
— Gatekeeper Address
— Use H.460
— Re-Registration Interval Time
— Authentication
— Mode
— Gatekeeper ID
— User Name
— Password
5. On the web interface, click Save.
Configuring WiFi network connectivity in Avaya IX
™
CU360
About this task
To connect Avaya IX
™
CU360 to the WiFi network, you must select the WiFi network and enter the
credentials and authentication type.
Configuring an H.323 gatekeeper for Avaya IX
™
CU360
April 2020 Installing and Administering Avaya IX Collaboration Unit CU360 47
Comments on this document? infodev@avaya.com
To Next Page
Loading...
