Avaya IX Collaboration Unit CU360 - Configuring WiFi Network Connectivity; Configuring Bluetooth Connectivity

Important:
Do not connect both Ethernet and WiFi networks simultaneously in Avaya IX
™
CU360.
Before you begin
Ensure that the Ethernet cable is not connected to Avaya IX
™
CU360.
Procedure
1. Click Configure > Networks.
2. Click Wi-Fi.
Avaya IX
™
CU360 displays the Wi-Fi window.
3. Enable WiFi.
4. Select and configure your WiFi network.
If you do not need to install security certificates for your WiFi network, set CA Certificate
to Do Not Validate.
Configuring Bluetooth connectivity in Avaya IX
™
CU360
Before you begin
Enable the Avaya IX
™
CU360 advanced settings.
Procedure
1. Select Configure.
Avaya IX
™
CU360 displays the Configure window.
2. Select Advanced.
The default PIN is 1234.
If your administrator configured a PIN to gain access to the advanced settings, Avaya IX
™
CU360 prompts you to the enter PIN. After you enter the PIN, Avaya IX
™
CU360 displays
the Advanced window.
3. Click System.
Avaya IX
™
CU360 displays the System window.
4. Select Security.
Avaya IX
™
CU360 displays the Security window.
5. Select Settings.
Avaya IX
™
CU360 displays the Settings window.
6. Click Bluetooth.
Initial administration
April 2020 Installing and Administering Avaya IX Collaboration Unit CU360 48
Comments on this document? infodev@avaya.com