Avaya IX Collaboration Unit CU360 - AT Commands Field Descriptions

6. On the web interface, click Save.
Related links
Enabling the Avaya IX CU360 advanced settings on page 37
AT Commands field descriptions
AT Commands section
Name Description
AT Commands Management The option to enable or disable remote access to Avaya IX
™
CU360 using
AT commands through the TCP, SSH and RS232 serial ports.
The options are:
• No: Disables the remote access to Avaya IX
™
CU360 using AT
commands through the TCP, SSH and RS232 serial port.
• IP only: Restricts the remote access to Avaya IX
™
CU360 using AT
commands to only the TCP connection.
IP section
Name
Description
Enable All Addresses The option to allow remote access to Avaya IX
™
CU360 using AT
commands from all IP addresses or restrict the AT commands access to a
specific range of IP addresses.
The options are:
• Yes: Enables the remote access to Avaya IX
™
CU360 using AT
commands from any IP address.
• No: Restricts the remote access to Avaya IX
™
CU360 using AT
commands to a specific range of IP addresses. You can define the
range of IP addresses in Address and Subnet Mask.
Address The IP addresses of the devices that you allow to send AT command.
You can enter a value in this field only if you configure Enable All
Addresses to No.
Subnet Mask The range of addresses that you allow to send AT command.
You can enter a value in this field only if you configure Enable All
Addresses to No.
SSH section
Name
Description
Enabled The option to enable the AT commands API through SSH.
Table continues…
AT Commands field descriptions
April 2020 Installing and Administering Avaya IX Collaboration Unit CU360 111
Comments on this document? infodev@avaya.com