Avaya IX Collaboration Unit CU360 - Testing Acoustic Pairing; Testing Monitor Image; Verifying Connected Equipment Status

2. Click the Play button next to one of the following tests:
• Local Tone: The audio input that Avaya IX
™
CU360 receives.
• Tx Tone: The audio output sent that Avaya IX
™
CU360 sends.
Testing the monitor image of Avaya IX
™
CU360
About this task
Test the monitor image of Avaya IX
™
CU360 to check for the optimization of the aspect ratio and
color rendering of the monitor display.
You can use the test image to finely tune monitor colors and aspect ratio using the remote control
of the monitor provided by the vendor.
Procedure
1. Click Configure > System Status > Diagnostics > I/O Connections > Monitor > Tests.
2. Click the Play button to generate the test image.
Verifying the status of the equipment connected to Avaya
IX
™
CU360
About this task
Check the status of the external monitor and other equipment connected to Avaya IX
™
CU360,
such as Avaya AV Grabber and Avaya B109 Conference Phone.
Procedure
Do one of the following:
• On the endpoint main menu, click Configure > System Status > Diagnostics > I/O
Connections > Status.
• On the web interface, click Diagnostics > I/O Connections > Status.
Result
Avaya IX
™
CU360 displays the status of the connected equipment.
Testing the monitor image of Avaya IX
™
CU360
April 2020 Installing and Administering Avaya IX Collaboration Unit CU360 123
Comments on this document? infodev@avaya.com