4. On the web interface, click Save.
New FQDN field descriptions
Name Description
Meeting FQDN The FQDN in the meeting location.
The meeting location is the virtual room associated with Avaya IX
™
CU360. The meeting location is in the https://<Meeting FQDN>/
portal/tenants/default/?ID=<MeetingID> format.
Dialing FQDN The FQDN of the SIP or H.323 server deployed in your Avaya Equinox
®
Solution deployment
• If the Avaya IX
™
CU360 is registered to a SIP or H.323 server that can
establish calls by adding a prefix to the virtual room number, leave this
field blank.
• If the Avaya IX
™
CU360is located outside the enterprise network and
not registered to a SIP or H.323 server, enter the domain address
specified after the at (@) symbol in the meeting invitation.
Prefix The prefix to the virtual room number of Avaya IX
™
CU360registered to a
SIP or H.323 server that can establish calls by adding a prefix.
Call Protocol The call protocol that Avaya IX
™
CU360 uses.
The options are:
• SIP
• H.323
Avaya IX CU360 security
Configuring PIN protection for Avaya IX
™
CU360 settings
About this task
Configure PIN for users to enter the PIN when users change the Avaya IX
™
CU360 configuration,
such as changing the interface language.
Before you begin
To configure PIN from:
• The endpoint, enable advanced configuration.
• The web interface, log in to the web interface using HTTPS.
Initial administration
April 2020 Installing and Administering Avaya IX Collaboration Unit CU360 52
Comments on this document? infodev@avaya.com
To Next Page
Loading...
