Avaya IX Collaboration Unit CU360 - Chapter 5: Advance Administration; Configuring Date and Time

Chapter 5: Advance administration
Configuring date and time in Avaya IX
™
CU360
About this task
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configured a PIN to gain access to the advanced settings on the
endpoint, Avaya IX
™
CU360 prompts you to enter the PIN. After you enter the PIN, Avaya
IX
™
CU360 displays the Advanced window.
3. Click System > Date & Time > General.
4. Configure the following fields:
• Day
• Month
• Year
• Time Format
• Hour
• AM/PM
• Minutes
• Internet Time
• Use Default NTP Servers
• Server 1
• Server 2
• Refresh Time (min.)
April 2020 Installing and Administering Avaya IX Collaboration Unit CU360 56
Comments on this document? infodev@avaya.com