Avaya IX Collaboration Unit CU360 - Page 62

• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configured a PIN to gain access to the advanced settings on the
endpoint, Avaya IX
™
CU360 prompts you to enter the PIN. After you enter the PIN, Avaya
IX
™
CU360 displays the Advanced window.
3. Do one of the following:
• On the web interface, click System > LDAP > Add Server.
• On the endpoint menu, click System > LDAP > Add.
4. Configure the following settings:
• Type
• Preferred
• Address
• Port
• User: This option is available only on the Equinox Management, Cloud, and Remote
H.350 (generic) servers.
• Password
• Base: This option is available only on the Remote H.350 (generic) server.
• RootDN: This option is available only on the Equinox Management, Cloud, and
Remote H.350 (generic) servers.
• Filter: This option is available only on the Remote H.350 (generic) server.
5. On the web interface, click Save.
Related links
Enabling the Avaya IX CU360 advanced settings on page 37
Advance administration
April 2020 Installing and Administering Avaya IX Collaboration Unit CU360 62
Comments on this document? infodev@avaya.com