Avaya IX Collaboration Unit CU360 - Preventing Users from Modifying Local Directory; Automatically Displaying Contacts from External Directories

Preventing users from modifying the local directory in
Avaya IX
™
CU360
About this task
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configured a PIN to gain access to the advanced settings on the
endpoint, Avaya IX
™
CU360 prompts you to enter the PIN. After you enter the PIN, Avaya
IX
™
CU360 displays the Advanced window.
3. Click System > LDAP > Favorites > Lock.
4. Click one of the following:
• Yes: Prevent users from modifying the local directory.
• No: Allow users to modify the local directory.
5. On the web interface, click Save.
Related links
Enabling the Avaya IX CU360 advanced settings on page 37
Automatically displaying contacts from external user
directories in Avaya IX
™
CU360
About this task
This configuration is available only if your administrator enables the advanced settings for users.
Before you begin
Configure external user directories in Avaya IX
™
CU360.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
Advance administration
April 2020 Installing and Administering Avaya IX Collaboration Unit CU360 64
Comments on this document? infodev@avaya.com