Avaya IX Collaboration Unit CU360 - Hiding the Call Rate Selection List; Disabling the Avaya IX CU360 Startup Tone

Hiding the call rate selection list in Avaya IX
™
CU360
About this task
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configured a PIN to gain access to the advanced settings on the
endpoint, Avaya IX
™
CU360 prompts you to enter the PIN. After you enter the PIN, Avaya
IX
™
CU360 displays the Advanced window.
3. Click System > Customization.
4. Select Yes for Hide Call Rate In Advanced Calling.
5. On the web interface, click Save.
Related links
Enabling the Avaya IX CU360 advanced settings on page 37
Disabling the Avaya IX
™
CU360 startup tone
About this task
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configured a PIN to gain access to the advanced settings on the
endpoint, Avaya IX
™
CU360 prompts you to enter the PIN. After you enter the PIN, Avaya
IX
™
CU360 displays the Advanced window.
3. Click System > Customization.
Advance administration
April 2020 Installing and Administering Avaya IX Collaboration Unit CU360 66
Comments on this document? infodev@avaya.com