Avaya J159 - Page 134

5. Press Toggle to select one of the following:
• Audible: The phone plays an error beep.
• Visual: The phone displays a mute icon on the top bar of the screen.
• Both: The phone beeps and displays a mute icon.
• None: The phone disables the mute alert.
6. Press Save.
Visual alerting
The beacon LED works in the following manner to indicate incoming calls and messages:
• If there is an incoming call, the beacon LED blinks.
• If there are new voice mail messages, the beacon LED is lit continuously.
• If the speaker is on during an active call and there are new voice mail messages, the beacon
LED turns off every 15 seconds.
• If the call is on hold, the beacon LED stops flashing.
Related links
Setting Visual alerting on page 134
Setting Visual alerting
About this task
The phone illuminates the beacon LED when there are incoming calls and messages. Use this
procedure to enable the visual alerting.
Procedure
1. Press Main Menu.
2. Scroll to Settings and press Select.
3. Scroll to Phone and press Select.
4. Scroll to Alerting on calls, and press Select.
5. Scroll to Beacon LED.
6. Press Toggle to enable or disable visual alerting.
7. Press Save.
Related links
Visual alerting on page 134
Customization
February 2022 Using Avaya J159 SIP IP Phone in Open SIP 134
Comments on this document? infodev@avaya.com