Avaya J159 - Page 146

Procedure
1. Press Main Menu.
2. Scroll to Settings and press Select.
3. Scroll to Audio settings and press Select.
4. Scroll to Headset signaling.
5. Press Toggle to select one of the following options:
• Disabled: Disables signaling from the phone to the headset.
• Switch hook and alert: Activates the link to the headset if you press Headset. When
the phone receives an incoming call you hear the alert tone in the headset.
• Switch hook only: Activates the link to the headset if you press Headset. When the
phone receives an incoming call you do not hear the alert tone in the headset.
6. Press Save.
Setting headset mic level
About this task
Use this procedure to adjust the best headset performance.
Before you begin
• Ensure that you are on a call and the caller’s audio level is at 50%.
• Adjust the microphone position as recommended by your headset vendor.
Procedure
1. Press Main Menu.
2. Scroll to Settings and press Select.
3. Scroll to Audio settings and press Select.
4. Scroll to Headset mic level, and press Select.
5. Press one of the following:
• Right arrow key: To increase the gain level.
• Left arrow key: To decrease the gain level.
6. (Optional) To set the default gain level, press Default.
Selecting a headset
About this task
Use this procedure to select a headset option for working with the phone. You can select the
following headsets: Wired, USB or Bluetooth.
Customization
February 2022 Using Avaya J159 SIP IP Phone in Open SIP 146
Comments on this document? infodev@avaya.com