The Telephone module features a built-in telephone hybrid.
The module features two gain controls, PFL, Master and Sub output routing
switches, hybrid Hook / Ring controls. It features connections to a regular
telephone line (POTS) and to an external standard telephone set (f.i. for
dialling). Automatic line compensation is featured.
The audio engineer (or the presenter) can talk off-air with a caller (whilst the Main
programme is being output) via its own microphone (connected to Mono module
and routed as TB to Studio) or the TB microphone built-in into the Monitor module.
The „Hook‟ button allows Line hooking. This switch hooks / hangs up the hybrid
from the telephone line. Hook LED switches on accordingly.
A „RING’ LED is provided for signalling of incoming calls.
ALPS N-type 90° ultra smooth 100 mm sliders are provided on series. On
request, to notify at order, ALPS K/VCA series sliders can be also fitted, the last
ones controlling an internal high quality VCA circuitry.
To Next Page
Loading...
Need help?
General
