Azbil C35 Series

5-41
Chapter 5. DETAILED DESCRIPTION OF EACH FUNCTION
SP
SP-2
SP-1
SP-3
PV at start
SP change
SP changeSP achievement
SP achievement
LSP1 group LSP2 group LSP3 group
Ramp 1
Ramp 2
Ramp 3
LSP change and multi-ramp
Note
The multi-ramp function is applicable to an application that changes the SP change
timing using the external switch or communication when performing the pattern
operation as shown above.
To set the SP value hold time,
5 - 6 Step Operation (p.5-43).