Azbil C35 Series - Page 200

6-24
Chapter 6. LIST OF DISPLAYS AND SETTING DATA
Display Item Contents
Initial
value
User
level
Notes
Internal Contact 2
Input assignment A
Same as Internal Contact 1 Input
assignment A to D.
3 2 Displayed when internal
contact 2 Input bit function is
set 1 to 4 (
DI 2.2
≠0).
Internal Contact 2
Input assignment B
0 2
Internal Contact 2
Input assignment C
0 2
Internal Contact 2
Input assignment D
0 2
Internal Contact 2
Polarity A to D
1st digit: Polarity A
2nd digit: Polarity B
3rd digit: Polarity C
4th digit: Polarity D
Same as Internal Contact 1 Polarity
A to D
The following setting applies to
each digit:
0: Direct
1: Reverse
0000 2
Internal Contact 2
Polarity
0: Direct
1: Reverse
0 2
Internal Contact 2
Event channel def.
0: Every Internal Event
1 to 8: Internal Event No.
0 2 Displayed when the
operation type of internal
contact 3 is timer stop/start
(
DI 2. 1
= 17).
Internal Contact 3
Operation type
Same as Internal Contact 1
Operation type.
0 0
Internal Contact 3
Input bit function
Same as Internal Contact 1 Input bit
function.
0: Not used. (Default input)
1 to 4: Function 1 to 4
0 2 When using internal contact
3, the default input is digital
input (DI) 3.
Internal Contact 3
Input assignment A
Same as Internal Contact 1 Input
assignment A to D.
4 2 Displayed when internal
contact 3 Input bit function is
set 1 to 4 (
DI 3.2
≠0).
Internal Contact 3
Input assignment B
0 2
Internal Contact 3
Input assignment C
0 2
Internal Contact 3
Input assignment D
0 2
Internal Contact 3
Polarity A to D
1st digit: Polarity A
2nd digit: Polarity B
3rd digit: Polarity C
4th digit: Polarity D
Same as Internal Contact 1 Polarity
A to D
The following setting applies to
each digit:
0: Direct
1: Reverse
0000 2
Internal Contact 3
Polarity
0: Direct
1: Reverse
0 2
Internal Contact 3
Event channel def.
0: Every Internal Event
1 to 8: Internal Event No.
0 2 Displayed when the
operation type of internal
contact 3 is timer stop/start
(
DI 3. 1
= 17).
Internal Contact 4
Operation type
Same as Internal Contact 1
Operation type.
0 0
Internal Contact 4
Input bit function
Same as Internal Contact 1 Input bit
function.
0: Not used. (Default input)
1 to 4: Function 1 to 4
0 2 When using internal contact
4, the default input is digital
input (DI) 4.
(Continue on next page.)