EasyManua.ls Logo

Azbil C35 Series - Page 272

Azbil C35 Series
290 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13-6
Chapter 13. SPECIFICATIONS
Environment conditions
Standard conditions
Ambient temperature: 23±2 °C
Ambient humidity: 60±5 %RH
Power supply voltage: AC power model, 105 V AC±1 %, 50/60 Hz±1 Hz
DC power model, 24 V AC±1 %, 50/60 Hz±1 Hz
24 V DC±5 %
Vibration: 0 m/s
2
Shock: 0 m/s
2
Mounting angle: (Reference plane) ±3 °
Operating conditions
Ambient temperature: 0 to 50 °C (0 to 40 °C for gang-mounting)
Ambient humidity: 10 to 90 %RH (non-condensing)
Rated power
supply voltage:
AC power model, 100 to 240 V AC, 50/60 Hz
DC power model, 24 V AC, 50/60 Hz or 24 V DC
Power supply voltage: AC power model, 85 to 264 V AC, 50/60 Hz±2 Hz
DC power model, 21.6 to 26.4 V AC, 50/60±2 Hz or 21.6 to 26.4 V DC
Vibration: 0 to 2 m/s
2
(10 to 60 Hz for 2 h in each of the X, Y, and Z-direction)
Shock: 0 to 10 m/s
2
Mounting angle: Reference plane (vertical) ±10 °
Transportation conditions
Ambient temperature: -20 to +70 °C
Ambient humidity: 10 to 95 %RH (non-condensing)
Other specifications
Power consumption: AC power model, Max. 12 VA
DC power model, Max. 12 VA (24 V AC), Max. 8 W (24 V DC)
Insulation resistance: Between power supply terminal and secondary terminal, 500 V DC, 20 MΩ
or more
Dielectric strength: AC power model, Between power supply terminal and secondary terminal,
1500 V AC for 1 min.
DC power model, Between power supply terminal and secondary terminal,
500 V AC for 1 min.
Inrush current at
power ON:
AC power model, Max. 20 A
DC power model, Max. 20 A
Non-detected power
failure time:
Max.20 ms (AC model)
No power failure allowed (DC model)
Altitude: 2000 m or less
Mass:
C35 48 × 96 Approx. 250 g (including mounting bracket)
C36 96 × 96 Approx. 300 g (including mounting bracket)
Terminal screw
tightening torque:
0.4 to 0.6 N·m
Standards compliance: EN61010-1,
EN61326-1 (For use in industrial locations)
During EMC testing, the reading or output may fluctuate by ±10 %FS.
Over-voltage category: Category II (IEC60364-4-443, IEC60664-1)
Allowable pollution
degree:
2
Console material: Polycarbonate
Case material/color: Reformed PPE/Light gray (DIC650)

Table of Contents

Related product manuals