1-5
Chapter 1. OVERVIEW
Detailed description of console
[mode] key
When this key is kept pressed for 1 s or longer in the operation display mode, any
of the following operations, which have been set previously, can be performed:
• AUTO/MANUAL mode selection
• RUN/READY mode selection
• Auto Tuning (AT) start/stop selection
• Local SP (LSP) group selection
• Release all Digital Output (DO) latches
• LSP/RSP mode selection
• ON/OFF selection of communication Digital Input (DI) 1
When pressing the [mode] key in the setup display mode, the display is changed
to the operation display.
[display] key
This key is used to change the display item in the operation display mode.
When pressing this key in the bank selection, bank setup, or user function setup
display mode, the display is changed to the operation display.
[para] key
When this key is kept pressed for 2 s or longer in the operation display mode, the
display is then changed to the bank selection display.
[<], [
], [
] keys
These keys are used to increase or decrease the numeric value, or to shift the
digit.
The [
] and [
] keys are used to change the bank in the bank selection display
mode. In the bank setup display mode, these keys are used to change the display
item.
[enter] key
This key is used to start changing setup values. Additionally, the key is also used
to set setup values currently being changed.
When pressing this key in the bank selection display mode, the bank is set and
the display is changed to the bank setup display.
Upper display
This display shows the PV value or the name of each display item (display value
or set value). If an alarm occurs in the operation display mode, the normal
display and alarm code are displayed alternately.
The decimal point at the right end digit shows auto tuning (AT) status. The
decimal point flashes twice repeatedly during execution of AT.
Lower display
This display shows the SP value, or the display value or set value of each display
item. The decimal point at the right end digit shows the RUN/READY mode or
communication status.
To Next Page
Loading...
Need help?
General
