Name: Azbil MagneW Neo PLUS
Brand: Azbil
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Azbil Corporation Operation using the data setting device

Model MTG11A/18A, MTG11B/18B, MTG14C 6-13

Writing on non-volatile memory

After downloading the changed setting data using SFC, save the setting data to

MangeW Two-wire PLUS non-volatile memory in approx. 30 seconds. Therefore, do

not turn the power off during the operation.

If you want to save the data immediately, press the key and key, then the

data will be written forcibly to non-volatile memory.

Changing communication method

Two wired magnetic flowmeter has the following 4 communication methods:

• SFN.A… SFC communication (Analog)

• SFN.D… SFC communication (Digital)

• HART… HART communication

• NONE… not using any communication function

~Note SFC communication (Digital) indicates Enhanced DE communication of

Honeywell Co.

For SFC communication, select “SFN.A”.

To change the communication method, operate using the touch keys. From the data

setting screen “COM SELECT” of “OPERATOR'S MODE”, it is required to set the

communication method to SFN.A. (Figure 6-4)

Figure 6-4 Data setting screen

SHIFT

ENTER

( Yes )

NON-VOL

COM SELECT

SFN.A

CM2-MTG300-2001.book 13 ページ２０１５年９月２９日　火曜日　午前１０時１４分

Questions and Answers:

Need help?

Do you have a question about the Azbil MagneW Neo PLUS and is the answer not in the manual?

Azbil MagneW Neo PLUS Specifications

General