Azbil Corporation Operation using the data setting device
Model MTG11A/18A, MTG11B/18B, MTG14C 6-49
6
Press the key.
Result:
• The screen as shown on the right
appears and the set detector
constant is confirmed.
7
or
Press the key or key to
display the screen as shown on the
right.
8
Press the key.
Result:
• The screen as shown on the right
appears and the changed setting is
written into the database of the
converter. The screen returns to step
3.
9
+
To exit this setting function, press the
+ keys.
10
Press the key.
Result:
• The screen exits the detector
constant setting function and
returns to the screen in step 1.
Step
Key Procedure SFC screen
CM2-MTG300-2001.book 49 ページ ２０１５年９月２９日 火曜日 午前１０時１４分
To Next Page
Loading...
