EasyManua.ls Logo

Baader IS-028 - Preface

Baader IS-028
65 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IS-28/28s
Baader Ísland ehf, Hafnarbraut 25, Kopavogur, IcelandTel: +354 520 6900 Fax: +354 520 6911
lager@baader.is / www.baader.is
2
PREFACE
The manual presents the machine and its proper usage for users. It contains
important information about its installation as well as safe, reliable and efficient
usage. It is intended for:
- Machine operators who usually operate and clean the machine daily
- Technicians responsible for the installation, preparation for production and
maintenance of the machine.
Read the manual and precaution instructions carefully. Do not operate the machine
before reading the manual and before the manual instructions are understood.
The manual must be always readily available where the machine is used. It must be
supplemented by the operator with additions and current directives of the respective
country concerning accident prevention and emission control.
This manual is part of the machine.
The manual must be included when the machine is purchased!
The manual must neither be copied nor accessible to a third party or misused without
our written consent!
The company Baader Ísland Ltd. is not responsible for any damage due to the failure
to comply with the manual, inadequate training of the personnel, unusual usage of
the machine as well as its usage for a different purpose than the one specified in this
manual!
Observe the current safety and legal procedures concerning machines in food
industry.
It is the responsibility of the machine’s owner that all the personnel operating the
machine receive training in the machine usage.
When dismounting, supplementing machine parts or making changes to the machine
on your own initiative without our consent, our declaration of accordance (EB-
Directive/CE) will expire.
Use only spare parts from BAADER!
Caution! In order to show better the machine’s functionality the protective parts have
been opened and removed. All protective parts must be in place when operating.
Otherwise it can lead to serious damage to health or death.

Table of Contents