IS-28/28s
Baader Ísland ehf, Hafnarbraut 25, Kopavogur, IcelandTel: +354 520 6900 Fax: +354 520 6911
lager@baader.is / www.baader.is
25
INSTRUCTION
Dirty water can cause blockage in the magnet valve and
spray nozzle of the machine!
- Only clean water is allowed to be used.
INSTRUCTION
The machine is not protected or can be responsible
for the water supplied.
- The operator must take all the measures concerning
the inspection of the water and the treatment of
category 5 fluids pursuant to DIN EN 1717 (existence
of disease causing bacteria and viruses).
COMPRESSED AIR CONNECTION
Compressed air connectors are in the tool box. Air distribution to the machine is done
in the toolbox.
Push an 8 mm hose into the coupler (fig.
20, in yellow)
INSTRUCTION
Dirt blocks the pressure
regulator and causes precipitation in the cylinder!
- The compressed air must be in
accordance with definition ISO 8573-1, category 7.4.3
(chapter 17). The intake is not allowed to exceed the
peak pressure, see ‘Technical Information’!
To Next Page
Loading...