EasyManua.ls Logo

Baader IS-028 - Electrical Connection

Baader IS-028
65 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IS-28/28s
Baader Ísland ehf, Hafnarbraut 25, Kopavogur, IcelandTel: +354 520 6900 Fax: +354 520 6911
lager@baader.is / www.baader.is
23
ELECTRICAL CONNECTION
The machine must be connected to an electrical power distribution system in
accordance with the wiring diagram, taking into account the provisions of the local
electrical power distribution company. Also, legal safety provisions must be observed,
e.g.:
- Europe / Germany: DIN/EN 60204-1 / VDE 0100
- BNA: NEC
- Canada: CEC
WARNING
Risk of electroshock!
The electrical equipment of the machine connected to the
mains contain dangerous, unprotected conductive parts,
mobile parts or rotating parts when the main switch is on
and the machine running.
- It is forbidden to remove the available protective
parts!
- Wrong operation or inadequate maintenance can
cause serious health and physical damage!
The personnel responsible for the safety of the machine must therefore
observe that...
…only the authorised personnel may work with the machine,
…this personnel must always have access to the included manual and all other
necessary documents in connection with the work and also that they commit
themselves to adhere completely to all the information included in the above
mentioned documents.
…it is forbidden for any unauthorised personnel to work with the machine or in the
vicinity of it.
WARNING
Risk of explosion!
- It is forbidden to spray any
substances into the electric
switch box and the switching device.

Table of Contents