EasyManua.ls Logo

Baader IS-028 - Main Cleaning

Baader IS-028
65 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IS-28/28s
Baader Ísland ehf, Hafnarbraut 25, Kopavogur, IcelandTel: +354 520 6900 Fax: +354 520 6911
lager@baader.is / www.baader.is
59
Main cleaning
Preparing the machine
- Carry out pre-cleaning
Cleaning the machine
WARNING!
Risk of detergents and disinfectants!
Wear protective clothes while cleaning and disinfecting.
- Observe the local regulations
on the usage of detergents and disinfectants
Clean the machine according to the instructions in the cleaning plan
Work arrangement
Detergent
2)
Device/method
Comments
Main cleaning
2 - 5% P3-topax
17
(Henkel)
1)
Apply foam with a foam
device
From the bottom to the
top. Leave it for 15 min.
To get rid of calcium precipitation use 2-5%
P3-topax 56 (Henkel) foam detergent 1 per
week instead of P3-topax 17
Water, max. 60°C
Rinse with low-pressure
max. 30 bars
Thoroughly from the top
to the bottom
Inspection
Visual
Disinfection
1% P3-topax 91
(Henkel)
Spray with low-pressure
max. 30 bars
From the top to the
bottom. Leave for 15
min. Depends on
viruses: see product
description document
Rinse
Water, c.a. 20°C
With low-pressure max.
30 bars
Rinse thoroughly
afterwards
1) To avoid white residue apply P3-topax 17-foam on hot spots.
2) You can find names of specified detergents for different countries in chapter ‘Detergents and
disinfectants (from Henkel)‘

Table of Contents