Baader IS-028 - Inspection and Maintenance Plan

IS-28/28s
Baader Ísland ehf, Hafnarbraut 25, Kopavogur, IcelandTel: +354 520 6900 Fax: +354 520 6911
lager@baader.is / www.baader.is
53
WARNING
Risk of dirt!
- When the maintenance and service
work is completed the respective
areas must be left in an impeccable state.
WARNING
Risk of dirt!
During the maintenance and service work the workers are
probably in contact with areas that are less often cleaned.
- Clean these areas thoroughly before other work is
done there
Inspection and maintenance plan
d = daily, v = weekly, m = monthly, á = yearly
Tasks to do
d
v
m
a
Inspect if all jacks work properly
x
Check if all springy parts of the machine work properly
x
Check the switching device and safety equipment
x
Check damages in de-heading knives
x
Replace and sharpen new knives
x
Lubricate according to the lubrication plan
x
Check the waterflow and pressure
x
Inspect if water hoses and connectors are tight
x
Check if safety marking/warning signs are in place on the machine and legible
x
Check if grease cups and grease pipe work properly (grease is pressed out)
x
Check if a detailed, legible and updated manual is available
x