IS-28/28s
Baader Ísland ehf, Hafnarbraut 25, Kopavogur, IcelandTel: +354 520 6900 Fax: +354 520 6911
lager@baader.is / www.baader.is
42
Place the knife in the machine
Hold the knife’s axis firmly with a 36 mm spanner and tighten/loosen the knife nut
with a 36 mm spanner.
Perform in the reverse order to prepare the machine for processing.
WARNING
Risk of cut injury caused by sharp knife edges!
Bacterial infections in cut injuries caused by knives
can lead to complications (e.g. blood poisoning). This
possibility cannot be eliminated in case of cut injury
even on thoroughly cleaned and disinfected
machines.
- Wear protective gloves when working with knives
or in the vicinity of them!
- Seek medical assistance in case of accident!
- Never run a check of the bit of the cutting edge
on the skin
WARNING
Retraction and risk of cut injury caused by mobile
parts of the machine!
If the machine is on while adjusting, it can cause serious
injury.
- If not stated otherwise, turn the main switch to
the 0-position and lock it!
To Next Page
Loading...