Index
MN1919
Footprint filter , A-3
Fuses, 3-14
G
General Information, 1-1
Grounding. See Earthing (grounding)
H
Hardware requirements, 3-1
Help file, 6-4
I
Incremental encoder, cable, A-11
Input / Output, 5-1
analog I/O, 5-2
analog input, 5-2, 8-4
connection summary, 5-17
digital I/O, 5-4
drive enable input, 5-5, 8-4
encoder output, 4-11, 8-6
general purpose digital input, 5-7, 8-4
serial port, 5-14, 8-6
multidrop using RS485/RS422 cable, 5-15
status output, 5-12, 8-5
step & direction inputs, 5-9, 8-4
Installation
See also Basic Installation
cooling, 3-5, 3-6, 3-7, 3-8
dimensions, 3-4
mechanical, 3-3
mounting, 3-5
L
LED indicator, 7-2
Linear motor, cable configuration, 4-6
M
Mint WorkBench, 6-3
Commissioning Wizard, 6-7
fine-tuning tool, 6-8
help file, 6-4
other tools and windows, 6-11
parameters tool, 6-10
starting, 6-5
Motor
circuit contactors, 3-18
connections, 3-17
power cable, 3-18–3-19, A-8
sinusoidal filter , 3-19
Mounting, 3-5
O
Operation, 6-1
connecting to the PC, 6-1
installing software, 6-1
power on checks, 6-2
preliminary checks, 6-2
starting, 6-2
Operator panels, HMI operator panels, 5-16
Overloads
drive, 3-14
motor, 3-17
overtemperature trips, 3-8
P
Power
24V control circuit supply , 3-16
connections, 3-10
discharge time, 3-12
disconnect and protection devices, 3-13
input conditioning, 3-12
input cycling, 3-12, 7-1
inrush, 3-12
sources, 3-1
supply filters, 3-15, A-4
using a variac, 3-13
Precautions, 1-2
Product Notice, 1-2
R
Receiving and Inspection, 2-2
Regeneration
capacity, 3-20
energy , 3-22
power, 3-22
resistor, 3-20
resistor, selection, 3-21
specification, 8-3
To Next Page
Loading...
