Barco CLM W6 - Section 2: Network Firmware Upgrade Procedure; Equipment Needed

5-6
CLM W6_CLM HD6 Jan 31, 2012
Chapter 5 Firmware Upgrade
Section 2: Network Firmware Upgrade Procedure
5-2-1 Equipment Needed
Software:
- CLM W6_LAN FW_xxx.bin (*.bin)
Hardware:
- Projector
- Power Cord: 42.50115G001
- LAN Cable
- PC
Note: - The Network FW Upgrade Procedure for CLM HD6 is the same as CLM W6,
we take CLM W6 as an example here.