Barco CLM W6 - Safety; General and Electrical Safety

CLM W6/CLM HD6 Jan 31, 2012
I
Table of Content
Chapter 1 Introduction
Highlight 1-1
System block diagram 1-4
Main board connection diagram 1-5
Chapter 2 Disassembly Process
Equipment Needed & Product Overview 2-1
Disassemble Projector Lens 2-2
Disassemble I/O COVER 2-3
Disassemble Main Board Module 2-5
Disassemble Lamp Module 2-8
Disassemble Color Wheel Module 2-10
Disassemble Front Cover Module 2-12
Disassemble Front Cover Shielding 2-14
Disassemble Top Cover 2-15
Disassemble Top Cover Shielding 2-15
Disassemble Keypad Board Module 2-16
Disassemble Connector Board 2-18
Disassemble Right Lamp Driver 2-22
Disassemble Dual lamp blower module 2-25
Disassemble Front dual lamp blower module 2-28
Disassemble ROD and DA blower module 2-30
Disassemble Blower Bracket 2-31
Disassemble Engine Module 2-32
Disassemble Fan (70*20) 2-42
Disassemble LVPS Module 2-45