Chapter 2 Disassembly Process
2-4
CLM W6_CLM HD6 Jan 31, 2012
6. Unscrew 6 screws (yellow circle),
remove LED module.
Repair note: - Please stick the 6 mylar (red
square) as it was when assemble
LED module.
7. Unplug 3 connectors (yellow square),
remove LED cable.
8. Open 6 clips (red square), separate
LED light Bar and LED light holder.
9. Disassemble I/O cover.
LED light holder
LED light Bar
To Next Page
Loading...
