PDS • User’s Guide 91
5. GUI Operations
Multiple Unit Control UI
^ÇÇáåÖ=råáíë=íç=íÜÉ=råáí=iáëí
1. Select the “Discover” tab (next to the “Edit” tab) in the upper right window of the
PDS Multiple Unit Control UI. The PDS Discover Menu will appear.
Figure 5-7. PDS Discover Menu
2. Press the “Discover” button in lower left corner of this window. The UI will query
the network and find all available PDS units.
3. Highlight one or more units in the list (use CTRL + Left Mouse Click to highlight
multiple units) and press “Add” to move them to the “Unit List”.
Figure 5-8. PDS Unit List
4. Use the “Edit” window to make changes to the Unit Name, Description or IP
Address, as necessary. Then select “Update”. The control section will be
displayed.
Note
Units can be manually added by selecting the “Manual Add”
button in the lower right corner of the “Unit List” window. Use
the “Edit” window to update the Unit Details for these
manually added units.
To Next Page
Loading...