Barco PDS - Ihatv; Ihcrop; Icsp

130 PDS • User’s Guide
_K==oÉãçíÉ=`çåíêçä
Remote Commands
• Parameters:
-i (input):1 - 9
-f (file): 1 - 64. If specified, update the File Association menu to reflect
the selected file number. If not specified, use the current file number
from the ICREC query.
• Query Format: N/A
• Query Response: N/A
f`pm
• Description: Input Colorspace Adjust
• Command Format: ICSP -i (input) -c (color)
• Parameters:
-i (input): 1 - 9
-c (color): 0-RGB, 1-SMPTE
• Query Format: ICSP -i (input) -?
• Query Response: ICSP -i (input) -c (color) --min 0 --max 1
• List Format: Each input type will have a different list for colorspace.
ICSP -i (input) --list
fe^qs
• Description: Input Horizontal Active Adjust. This command is only adjustable for
analog input types. Other input types will provide query information only.
• Command Format: IHATV -i (input) -a (active)
• Parameters:
-i (input): 1 - 8 for adjustments (5 - 8 only if itype is analog); 1 - 9 for
query
-a (active): In pixels
• Query Format: IHATV -i (input) -?
• Query Response:
IHATV -i (input) -a (active) --min (active min) -- max (active max)
fe`olm=
• Description: Input Horizontal Crop
• Command Format: IHCROP -i (input) -w (width)
• Parameters:
-i (input): 1 - 9
-w (width): In pixels
• Query Format: IHCROP -i (input) -?
• Query Response: IHCROP -i (input) -w(width) --min (pos min) -- max (pos max)