Barco PDS - Input Commands; Blkvid; Cbleq; Edid

PDS • User’s Guide 125
_K==oÉãçíÉ=`çåíêçä
Remote Commands
fåéìí=`çãã~åÇë
_ihsfa
• Description: Puts black into the program input.
• Command Format: BLKVID -m (mode)
• Parameters: -m (mode): 0 - off, 1 - on
• Query Format: N/A
• Query Response: N/A
`_ibn
• Description: Sets cable equalization. Command valid only for DVI input
channels.
• Command Format: CBLEQ -i(input) -c(cable equalization)
• Parameters:
-i (input): 5-6 (PDS-701) 5-8 (PDS-901 and PDS-902)
-c (cable equalization): 0 - 15 (Default: 12)
• Query Format: CBLEQ -i(input) -?
• Query Response: CBLEQ -i(input) -c (cable equalization) --min 0 --max 15
bafa
• Description: Sets Input EDID Resolution.
• Command Format: EDID -i (input) [-f (format) | -n (index)]
• Parameters:
-i (input) : 1-6 (PDS-701) 1-8 (PDS-901 and PDS-902)
-f (format): Format string, i.e. "1024x768 @59.94"
or
-n (index): Video format index
• Query Format: EDID -i (input) -?
• Query Response: EDID -i (input) -f (format)
• List Format: EDID -i (input) --list
• List Response:
2:"720x480p"
4:"720x576p"
5:"720x576p - 16:9"
Etc.
bafaqvmb
• Description: Sets EDID type. This command is valid only for the DVI input
channels.
• Command Format: EDIDTYPE -i(input) -t(EDID type)