Barco PDS - Logodel; Logosave; Logosel; Logostat

148 PDS • User’s Guide
_K==oÉãçíÉ=`çåíêçä
Remote Commands
• Parameters:
-b (brightness): 1 - 8 (default: 5)
-f: Command from front panel
• Query Format: VFDBRT -?
• Query Response: VFDBRT -b (brightness) --min 1 -- max 16
ildl=`çãã~åÇë
ildlabi=
• Description: Delete the selected logo file.
• Command Format: LOGODEL -l (logo)
• Parameters: -l logo: 1 - 3 (Default: 1)
• Query Format: N/A
• Query Response: N/A
ildlp^sb=
• Description: Save the image on Program output to the selected logo frame store
and file.
• Command Format: LOGOSAVE -l (logo)
• Parameters: -l logo: 1 - 3 (Default: 1)
• Query Format: N/A
• Query Response: N/A
ildlpbi=
• Description: Logo selection
• Command Format: LOGOSEL -l (logo)
• Parameters: -l logo: 1 - LOGO1, 2 - LOGO2, 3 - LOGO3 (Default: LOGO1)
• Query Format: LOGOSEL -?
• Query Response: LOGOSEL -l (logo) --min 1 --max 3
• List Format: LOGOSEL --list
• List Response:
1:"LOGO1"
2:"LOGO2"
3:"LOGO3"
ildlpq^q=
• Description: The logo format status. This command is a query only.
• Parameters: -l logo: 1 - LOGO1, 2 - LOGO2, 3 - LOGO3
• Query Format: LOGOSTAT -l (logo) -?
• Query Response: LOGOSTAT -l (logo) -s (status string)