Barco PDS - Contact Information

136 PDS • User’s Guide
_K==oÉãçíÉ=`çåíêçä
Remote Commands
fs`olm=
• Description: Input Vertical Crop
• Command Format: IVCROP -i (input) -h (height)
• Parameters:
-i(input): 1 - 9
-h(height): In lines
• Query Format: IVCROP -i(input) -?
• Query Response: IVCROP -i(input) -h(height) --min (pos min) -- max (pos max)
fsm^k=
• Description: Input Vertical Pan
• Command Format: IVPAN -i (input) -p (pan)
• Parameters:
-i (input): 1 - 9
-p (pan): In pixels
• Query Format: IVPAN -i (input) -?
• Query Response: IVPAN -i (input) -p (pan) --min (active min) -- max (active
max)
fsmlp
• Description: Input Vertical Position Adjust. This command is only adjustable for
analog input types. Other input types will provide query information only.
• Command Format: IVPOS -i (input) -p (position)
• Parameters:
-i (input): 1 - 8 for adjustments (5 - 8 only if input is analog); 1 - 9 for
query
-p (position): In lines
• Query Format: IVPOS -i (input) -?
• Query Response: IVPOS -i (input) -p (position) --min (pos min) -- max (pos max)
fsqlq^i
• Description: Input Vertical Total Adjust. This command is a query only.
• Parameters: -i (input): 1 - 9
• Query Format: IVTOTAL -i (input) -?
• Query Response: IVTOTAL -i (input) -t (total)
m`ljm=
• Description: Pulldown Compensation mode adjust.
• Command Format: PCOMP -i (input) -m (mode)
• Parameters: