Barco PDS - Encoreip; Fpupdate; Istat; Lclr

144 PDS • User’s Guide
_K==oÉãçíÉ=`çåíêçä
Remote Commands
bk`lobfm=
• Description: Set Encore IP Address.
• Command Format:ENCOREIP -s(static addr)
• Parameters: -s(static addr):format is xxx.xxx.xxx.xxx
• Query Format: ENCOREIP -?
• Query Response: ENCOREIP -s(static addr)
cmrma^qb=
• Description: Requests a front panel update. Front panel menu and key backlights
are updated to reflect current system state.
• Command Format:FPUPDATE
• Parameters: N/A
• Query Format: N/A
• Query Response: N/A
fpq^q
• Description: Query only command for the input status type and format.
• Parameters:
-i (input): 1 - 6 and 9 (PDS-701); 1 - 9 (PDS-901/902)
-p (path): 0 - preview, 1 - program
• Query Format: ISTAT -i (input) -p (path) -?
• Query Response: ISTAT -t "(input type)" -f "(input format)"
i`io
• Description: Clear the selected log (ram copy, not flash).
• Command Format: LCLR -l (log)
• Parameters: -l (log): 0-combined, 1-debug, 2-warning, 3-error
• Query Format: N/A
• Query Response: N/A
iajm
• Description: Display the current log messages (ram copy, not flash) for the
selected log.
• Command Format: LDMP -l (log)
• Parameters: -l (log): 0-combined, 1-debug, 2-warning, 3-error
• Query Format: N/A
• Query Response: N/A