Barco PDS - Iautoc

PDS • User’s Guide 127
_K==oÉãçíÉ=`çåíêçä
Remote Commands
• Command Format: IAR -i (input) -r (ratio) -c (custom ratio)
• Parameters:
-i (input): 1 - 9
-r (ratio): 1 - 1:1, 2 - 3:2, 3 - 4:3, 4 - 5:4, 5 - 16:10, 6 - 16:9
-c (custom ratio): .75 - 3.0
• Query Format: IAR -i (input) -?
• Query Response: IAR -i (input) -c (custom ratio) --min .75 -- max 3
or
IAR -i (input) -r (ratio) --min 1 -- max 5
• List Format: IAR -i (input) --list
• List Response:
1:"1:1"
2:"3:2"
3:"4:3"
4:"5:4"
5:"16:10"
6:"16:9"
f^rql^`h=
• Description: Input Source Acquire Mode.
• Command Format:IAUTOACQ -i(input) -m(mode)
• Parameters:
-i (input): 1 - 9
-m (mode): 0-off, 1- on
• Query Format: IAUTOACQ –i (input) -?
• Query Response: IAUTOACQ –i (input) –m (mode) --min 0 --max 1
f^rql`=
• Description: Attempts to detect and adjust input video to the active video area.
This command is only for analog input types.
• Command Format: IAUTOC -i (input)
• Parameters: -i (input): 1 - 8 for adjustments (5 - 8 only if itype is analog)
• Query Format: N/A
• Query Response: N/A
f^s^fi
• Description: Query-only command for input availability. This command can be
used to identify whether the DVI inputs 7 and 8 are available by querying for input
7 or 8.