Barco PDS - Blktran; Conmode; Context; Diag

PDS • User’s Guide 143
_K==oÉãçíÉ=`çåíêçä
Remote Commands
• List Response:
1:"Black"
2:"Gray"
_ihqo^k=
• Description: Sets whether going to black is a direct transition or requires a
TAKE.
• Command Format: BLKTRAN -m (mode)
• Parameters: -m (mode): 0 - take is required, 1 - do an immediate transition
(Default: off)
• Query Format: BLKTRAN -?
• Query Response: BLKTRAN -m (mode) --min 0 -- max 1
`lkjlab=
• Description: Encore connect mode.
• Command Format:CONMODE –m (mode)
• Parameters: -m (mode): 0-off, 1- on
• Query Format: CONMODE -?
• Query Response: CONMODE –m (mode) --min 0 --max 1
`lkqbuq=
• Description: Sets menu context
• Command Format: CONTEXT -m (mode)
• Parameters: -m (mode): 0 - off, 1 - on
• Query Format: CONTEXT -?
• Query Response: CONTEXT -m (mode) --min 0 -- max 1
af^d
• Description: Performs a system diagnostic test. The results are logged into a file
which may be displayed using DIAGD.
• Command Format: DIAG
• Parameters: None
• Query Format: N/A
• Query Response: N/A
af^da
• Description: Display the results of the last performed system diagnostic test.
• Command Format: DIAGD
• Parameters: None
• Query Format: N/A
• Query Response: N/A