Barco PDS - Physical and Electrical Specifications; Communications Specifications; Agency Specifications

108 PDS • User’s Guide
^K==péÉÅáÑáÅ~íáçåë
Physical and Electrical Specifications
mÜóëáÅ~ä=~åÇ=bäÉÅíêáÅ~ä=péÉÅáÑáÅ~íáçåë=
The table below lists PDS physical and electrical specifications.
`çããìåáÅ~íáçåë=péÉÅáÑáÅ~íáçåë=
The table below lists PDS communications specifications.
^ÖÉåÅó=péÉÅáÑáÅ~íáçåë=
The table below lists PDS agency specifications.
Table A-3. PDS Physical and Electrical Specifications
Parameter Detail Specification
Power Connector Standard IEC, integral on/off switch
Power 100-240 VAC, 50-60 Hz
Mechanical
Chassis H: 1.75 inches (4.4 cm), 1 RU rack mount
W: 17.00 in. (43.2 cm), 19.06 in. (48.4 cm) with wings
D: 14.25 in. (36.19 cm)
Temperature
0-40 degrees C
Humidity
0-95% non-condensing
Weight
12.5 lbs (5.67 kg)
Shipping Weight
16 lbs (7.25 kg)
Table A-4. PDS Communications Specifications
Parameter Detail Specification
Communications Ethernet RJ-45, 10/100 Mbps
Serial DB-9 Female, DCE, 115k Baud
Table A-5. PDS Agency Specifications
Parameter Detail Specification
Agency Specifications EMI/EMC EN55103-1 E4, EN55103-2, FCC Part 15 Subpart B Class A
Safety EN 60950 Class 1