Barco PDS - Program; Reset; Save; Serial

146 PDS • User’s Guide
_K==oÉãçíÉ=`çåíêçä
Remote Commands
• Parameters:
-i (input): 1 - 9
-b: black on preview
-l: logo on preview
-a: A or B path of scaler input on preview
• Query Format: PREVIEW -?
• Query Response: PREVIEW -i(input) -k -b
moldo^j=
• Description: Query only command for the input and black button status on
program. If the black or scaler path is not present on program, then these options
are not returned.
• Parameters:
-i (input): 1 - 9
-b: black on preview
-l: logo on preview
-a: A or B path of scaler input on preview
• Query Format: PROGRAM -?
• Query Response: PROGRAM -i(input) -k -b
obpbq
• Description: Reset unit
• Command Format: RESET [-f | -s ]
• Parameters:
-f : factory reset
or
-s: soft reset
• Query Format: N/A
• Query Response: N/A
p^sb=
• Description: System Save
• Command Format: SAVE
• Parameters: N/A
• Query Format: N/A
• Query Response: N/A
pbof^i=
• Description: Sets the serial port.
• Command Format: SERIAL -b (baud) -p (parity/etc.) -h (handshaking)